Nissan Motor Co., Ltd and Kobe Steel, Ltd announced that Nissan plans to use Kobenable Steel (1) for Nissan models from January 2023 onward. Kobenable steel, commercialized by Kobe Steel, significantly reduces CO2 emissions in the blast furnace process.

Kobe Steel will also supply Nissan with aluminum sheets made from green-aluminum raw materials. This will be the first time Kobenable Steel will be used in mass- produced vehicles.

Nissan aims to achieve carbon neutrality throughout the entire product life cycle (2) by 2050.

Autonomous Vehicle Trends From 2022 and What to Expect in 2023

Since approximately 60% of a vehicle's weight is made up of steel parts and around 10% of its weight is made up of aluminum parts, the use of green steel and green aluminum is a very effective way to reduce CO2 emissions during parts manufacturing, which is part of the vehicle's life cycle.

Therefore, the companies’ decision to use the steel and aluminum for Nissan vehicles is due not only to the significant CO2 emission reductions but also because the same level of high quality as conventional products can be achieved.

Nissan models will use Kobenable Premier, which reduces 100% of CO2 emissions during manufacturing through the mass-balance method (3). The specific amount of steel to be used by Nissan will be determined through further discussions.

The green aluminum raw materials purchased by Kobe Steel to produce aluminum sheets for Nissan are electrolytically smelted using only electricity generated by solar power, thereby reducing CO2 emissions during aluminum ingot production by approximately 50% (4).

Recycled aluminum materials generated at Nissan's manufacturing sites will also be used to further reduce CO2 emissions during production.

Both companies will continue their efforts to reduce CO2 emissions with the aim of realizing a carbon- neutral society in the future.

1 - The reduction of CO2 emissions was demonstrated by charging into the blast furnace at Kobe Steel’s production site Kakogawa Works a large amount of HBI produced by the MIDREX® Process, a distinctive technology of the Kobe Steel Group. Press release link here.

2 - Includes raw material extraction, manufacturing, use, and the recycling or reuse of end-of-life vehicles.

3 - A method to allocate specific characteristics to a certain portion of products according to the input amount of raw materials with the characteristics when there is a mix of raw materials with and with no such characteristics (e.g., low CO2) in the manufacturing process. Through the mass balance methodology, CO2 reduction effects are allocated to specific products.

4 - Compared to the previous product of a material supplier.

Read More: HRH Crown Prince Launches Ceer, the First Saudi Electric Vehicle Brand